Can Flexiteek 2G be used vertically?
Flexiteek 2G is surface conforming, so it can be used on most angles and contours, both vertically and horizontally.
Flexiteek 2G is surface conforming, so it can be used on most angles and contours, both vertically and horizontally.
Flexiteek 2G will compress if a fitting is through-bolted. We would recommend anything bolted is placed on a solid packer such as tufnol, UPVC, aluminium etc.
If you require, Flexiteek 2G can be supplied on a marine ply, GRP, laminate board or foam layer of varying thickness to enable a snug fit to a recess or edge.
We have tested many adhesives and recommend the use of 2G MS polymer or PU2K adhesives depending on your installation method.
Flexiteek 2G adhesives will adhere to most surfaces successfully; if the subsurface is painted. Often a 2-part epoxy can be used to create a suitable subsurface for application of our adhesives.
A margin board is the framing around the planks and is normally a slightly wider section compared to the planks used to define it.
Flexiteek 2G is “welded” using vinyl welding techniques to ensure clean sealed joints.
Flexiteek 2G is the only second generation synthetic decking on the market and offers a lighter and cooler alternative to others in the market, with a wide range of realistic ‘wood’ finishes and colours.